What you’ll do\n\nWithin the Manufacturing Engineering scope, the Product Engineering team evaluates, reports, and achieves manufacturability KPI’s by consulting with R&D on optimal product design.\n\nSuccess is achieved by intimate knowledge of product design, production process and project management. The “Manufacturing Engineering Assembly Interior” is responsible for the overall interior of the vehicle in General Assembly. You will report to the Manager, Body System Assembly at Production Planning.\n\nBecome part of an iconic brand that is set to revolutionize the all-electric pick-up truck & rugged SUV marketplace by achieving the following:\n\n\n* Your goal is to improve the product, design the vehicles according to the needs of manufacturing and to enable stable and ergonomic processes that are feasible for high volume manufacturing.\n\n* Identify, decide and implement technical requirements from manufacturing to influence product design.\n\n* Collaborate with manufacturing, quality, production control, and engineering to provide product design and product concepts according to the needs of General Assembly.\n\n* Use CAD-Data-Analysis, Simulations and virtual tests to identify risks for high volume manufacturing.\n\n* Identify and implement ideas to improve product design to ensure stable processes and minimal rework in series production.\n\n* Ensure that all products are designed to meet assembly requirements and that product design is feasible for high volume manufacturing.\n\n* Take responsibility for all communication between production planning assembly and engineering department as Single point of contact for all vehicle design related topics.\n\n* Use cross departmental collaboration to meet and exceed company goals and objectives in the field of design for manufacturing.\n\n* Coordinating activities within the team that outline and achieve project goals.\n\n* Providing instruction and guidance about required techniques and regulations.\n\n\n\n\nLocation & Travel Expectations: The responsibilities of this role require daily attendance at in-person meetings and events. The role will be based out of a Scout Motors location in Columbia, South Carolina. Applicants should expect that the role may require the ability to convene with Scout colleagues in person and be able to travel to participate in events on behalf of the company from time to time. \nWhat you’ll bring \n\nWe expect all Scouts to have integrity, curiosity, resourcefulness, and strive to exhibit a positive attitude, as well as a growth mindset. You’ll be comfortable with change and flexible in a fast-paced, high-growth environment. You’ll take a collaborative approach to achieve ambitious goals. \n\n\n* Bachelor’s / master’s degree in mechanical, electrical engineering or equivalent.\n\n* 3+ years professional experience with expertise in manufacturing engineering or production planning (General Assembly), including ability to achieve stable production processes.\n\n* Deep knowledge of vehicle engineering processes\n\n* Bachelor’s / master’s degree in mechanical, electrical engineering or equivalent.\n\n* Skillful at organizational navigation and cross-functional collaboration at all levels; ability to develop effective partnerships and relationships.\n\n* Creative and strategic problem solver who exercises sound judgment.\n\n\n\nWhat you'll gain\n\nThe benefits of joining Scout include the chance to build products and a company from the ground up.  This is a chance to create something new and lasting – with an iconic brand at its foundation.  In addition, Scout provides competitive compensation and benefits to support your physical, mental, and financial wellbeing. Program specifics are detailed in company policies and employee benefit guides, select highlights:\n\n\n* Competitive insurance including:\n\n\n* Medical, dental, vision and income protection plans\n\n\n\n\n\n* 401(k) program with:\n\n\n* An employer match and immediate vesting\n\n\n\n\n\n* Generous Paid Time Off including:\n\n\n* 20 days planned PTO, as accrued\n\n* 40 hours of unplanned PTO and 14 company or floating holidays, annually\n\n* Up to 16 weeks of paid parental leave for biological and adoptive parents of all genders\n\n* Paid leave for circumstances related to bereavement, jury duty, voting time, or military leave\n\n\n\n\n\n* Corporate Vehicle Program with:\n\n\n* Eligibility to lease up to 2 vehicles at competitive rates\n\n\n\n\n\n\n\nPay Transparency\n\nThis is a full-time, exempt position eligible to receive a base salary and to participate in an annual performance bonus program. Final salary offered will be determined based on factors including but not limited to the candidate's skills and experience. The annual performance bonus program is preset and not candidate dependent.\n\nInitial base salary range = $110,000-$130,000\n\nInternal leveling code: IC9\n\nNotice to applicants:\n\n\n* Residing in San Francisco: Pursuant to the San Francisco Fair Chance Ordinance, Scout Motors will consider for employment qualified applicants with arrest and conviction records. \n\n* Residing in Los Angeles: Scout Motors will consider for employment qualified applicants with criminal histories in a manner consistent with the Los Angeles Fair Chance Initiative for Hiring Ordinance. \n\n* Residing in New York City: This role is not eligible for remote work in New York City.\n\n\n \n\n#Salary and compensation\n No salary data published by company so we estimated salary based on similar jobs related to Design, Consulting and Engineer jobs that are similar:\n\n $60,000 — $110,000/year\n
\n\n#Benefits\n 💰 401(k)\n\n🌎 Distributed team\n\n⏰ Async\n\n🤓 Vision insurance\n\n🦷 Dental insurance\n\n🚑 Medical insurance\n\n🏖 Unlimited vacation\n\n🏖 Paid time off\n\n📆 4 day workweek\n\n💰 401k matching\n\n🏔 Company retreats\n\n🏬 Coworking budget\n\n📚 Learning budget\n\n💪 Free gym membership\n\n🧘 Mental wellness budget\n\n🖥 Home office budget\n\n🥧 Pay in crypto\n\n🥸 Pseudonymous\n\n💰 Profit sharing\n\n💰 Equity compensation\n\n⬜️ No whiteboard interview\n\n👀 No monitoring system\n\n🚫 No politics at work\n\n🎅 We hire old (and young)\n\n
\n\n#Location\nColumbia, South Carolina, United States

\nBusiness Unit Introduction – [HM or Recruiter to select the correct BU and delete the rest]\n\nEngineering and Program Management: This role is part of Enterprise Program Management (EPM), where we provide technical standards, tools, processes, training, and subject matter expertise for product engineering and manufacturing. EPM allows all Blue Origin business units to benefit from commonly used capabilities, hardware, and software and assists business units in identifying, selecting, and training engineers from both inside and outside the organization.\n  \nAs part of a hardworking team of diverse specialists, technicians, and engineers (use as appropriate), you will [Copy/paste the job profile summary from Workday here. Completed by hiring manager during requisition creation.]\n\nSpecial Mentions [Edit or remove as needed]\n* Relocation provided\n* Travel expected up to __% of the time\n* Shifts available:\n\n\nThis is a Second Shift Position\n* Interviews will include a technical assessment\n* This position is not eligible for remote work.\n\n\n\nResponsibilities include but are not limited to:\n* \nResponsible for a wide variety of aerospace structure, including welded and machined aluminum, and large composite components.\n* \nMaintain structural design and configuration integrity of primary and secondary structures.\n* \nPerform repair analysis of primary and secondary metallic and composite structures.\n* \nProvide technical guidance for structural build and integration\n* \nLead efforts to identify, develop, and deploy designs and methodologies that improve operational excellence through quality, cost, design, and process enhancements.\n* \nSupport the manufacturing floor in assembly and installation, compliance to engineering requirements, discrepancy resolution, and component acceptance testing.\n* \nPerform a hands-on engineering and liaison role between our design, test, and operations teams and our manufacturing customers.\n* \nInvestigate root causes, disposition vehicle discrepancies, and take ownership of preventative and corrective actions.\n* \nSupport the product through design and operational gated reviews by evaluating and aiding in the development of required artifacts.\n* \nDrive design for manufacture and assembly (DfMA) into the designs\n* \nAuthorize in-build redlines and recommend changes to improve the design.\n\n\n\nMinimum Qualifications:\n* \nMinimum of a B.S. degree in engineering and 5+ years of experience with aircraft, spacecraft, or launch vehicle structures.\n* \nFamiliarity with mechanics of materials, stress/strain, and statics\n* \nAbility to apply structural mechanics principles using hand calculations\n* \nFamiliarity with Geometric Dimensioning and Tolerance analysis\n* \nExperience in Design for Manufacture and Assembly (DfMA)\n* \nDemonstrated experience developing manufacturing processes for transition to production.\n* \nFamiliarity with aerospace hardware, fasteners, adhesives, coatings etc.\n* \nDesire to work hands-on, both independently and as a cross-disciplined team, throughout the development and production phases of the product lifecycle.\n* \nStrong coordination and project management skills to track, manage, and prioritize multiple ongoing tasks.\n* \nStrong digital literacy with the ability to rapidly learn and use a variety of software tools, as needed.\n* \nExceptional interpersonal skills that foster positive professional relationships.\n* \nPrevious experience with engineering change orders and non-conformance processing\n* \nMust be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.\n\n\n\nPreferred Qualifications:\n* \nExperience with Manufacturing Execution Systems/Software and processes\n* \nUnderstanding of development product lifecycle management and associated gated reviews\n* \nExperienced with fabrication of composite primary structures for aerospace\n* \nBasic familiarity with commercially available structures software (Nastran, ANSYS, Abaqus, HyperMesh, etc.)\n* \nKnowledge of fabrication processes, integration processes, systems engineering practices, test, quality, and configuration management systems\n* \nProven experience developing/starting new manufacturing processes\n* \nProven understanding and applied experiences in Lean Manufacturing and Six Sigma\n* \nProficiency in business and engineering software (i.e. MSOffice, Windchill, PLM, etc)\n\n \n\n#Salary and compensation\n No salary data published by company so we estimated salary based on similar jobs related to Design and Engineer jobs that are similar:\n\n $55,000 — $110,000/year\n
\n\n#Benefits\n 💰 401(k)\n\n🌎 Distributed team\n\n⏰ Async\n\n🤓 Vision insurance\n\n🦷 Dental insurance\n\n🚑 Medical insurance\n\n🏖 Unlimited vacation\n\n🏖 Paid time off\n\n📆 4 day workweek\n\n💰 401k matching\n\n🏔 Company retreats\n\n🏬 Coworking budget\n\n📚 Learning budget\n\n💪 Free gym membership\n\n🧘 Mental wellness budget\n\n🖥 Home office budget\n\n🥧 Pay in crypto\n\n🥸 Pseudonymous\n\n💰 Profit sharing\n\n💰 Equity compensation\n\n⬜️ No whiteboard interview\n\n👀 No monitoring system\n\n🚫 No politics at work\n\n🎅 We hire old (and young)\n\n
\n\n#Location\nSpace Coast, FL

\nAbout Cobalt Robotics:\n\n\nwww.cobaltrobotics.com\n\n\nCobalt Robotics utilizes a combination of human expertise, robotic technology, and omni solutions to effectively resolve any security incidents. Our dedicated team patrols and monitors sites 24/7 to proactively prevent break-ins, identify significant leaks, and provide our customers with visibility over their space, their assets, and their data.\n\n\nCobalt's team is composed of renowned technologists and security professionals and is backed by world-class investors such as Sequoia, Bloomberg Beta, and Coatue. In 2019, Cobalt was recognized as one of the Best Places to Work by the Silicon Valley Business Journal and the San Francisco Business Times.\n\n\nWe’re looking for people who want to make an impact with us and help build a company that is known for its excellence in engineering, passion for progress, and dedication to customers.\n___________________________________________________________________________\n\n\nAbout The role: The Reserve Engineer (RE) is someone who is knowledgeable with computer hardware and provides our clients with top-notch customer service. The RE serves as Cobalt's "boots on the ground" and are part of our rapid-response field-operations team in the event a hardware-failure happens at a client site. Occasionally, REs assist with field projects and new robot deployments. The RE an essential role-player in keeping our robots operating and our clients happy. Please note, this is not a remote position.\n\n\n\nWhat You'll Do\n* Learn our robot hardware inside and out to be comfortable servicing and maintaining our machine. (we'll provide the paid training)\n* Communicate with both technical and non-technical teammates with field repairs and projects.\n* Ensure hardware failures on our robots are addressed, and resolved within a safe and timely manner.\n* Occasionally assist with field operation projects and new robot deployments \n* Be dispatched to client sites within your area to resolve hardware failures 1-3 times a month(potentially more)\n* Reports to a Regional Project Manager for tasking and delegation.\n\n\n\nYou're a great candidate if:\n* You're excited about robotics, artificial intelligence, machine learning, and willing to learn\n* You're familiar with hardware assembly and disassembly.(Tool kit with basic hand tools will be provided)\n* You're Familiar with computer hardware and small electrical components(proprietary training will be provided)\n* You're an excellent communicator and comfortable collaborating and receiving instruction on platforms such as Slack, GoogleMeet/Hangout etc.\n* You are available during days and times within Mon-Fri, 9a-5p. (Flex/Oncall schedule)\n* You're open to support jobs that may occur after hours(5pm-9am) and on weekends.(Flex/Oncall schedule)\n* You're presentable and comfortable speaking to clients from Fortune 100 & 500 companies.\n* You love providing great customer service.\n\n\n\nBonus Skills:\n* Experience with robotics \n* Experience with computer hardware and electrical components\n* Experience working in a fast-paced startup environment.\n* Military/First Responder\n* Associate degree or higher \n\n\n\n\n\nInterested? Apply now!\nCurious to see the robot? Check out our YouTube.\n\n\nThe Reserve Engineer is a 1099 contractor position at Cobalt Robotics and is NOT a remote position. Compensation range is between $20-$50/USD hr DOE. Cobalt Robotics does NOT pay for relocation for this role.\n\n\nWe are an equal opportunity employer and value diversity at our company. We do not discriminate against the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.\n\n\n\n \n\n#Salary and compensation\n No salary data published by company so we estimated salary based on similar jobs related to Engineer and Engineer jobs that are similar:\n\n $60,000 — $110,000/year\n
\n\n#Benefits\n 💰 401(k)\n\n🌎 Distributed team\n\n⏰ Async\n\n🤓 Vision insurance\n\n🦷 Dental insurance\n\n🚑 Medical insurance\n\n🏖 Unlimited vacation\n\n🏖 Paid time off\n\n📆 4 day workweek\n\n💰 401k matching\n\n🏔 Company retreats\n\n🏬 Coworking budget\n\n📚 Learning budget\n\n💪 Free gym membership\n\n🧘 Mental wellness budget\n\n🖥 Home office budget\n\n🥧 Pay in crypto\n\n🥸 Pseudonymous\n\n💰 Profit sharing\n\n💰 Equity compensation\n\n⬜️ No whiteboard interview\n\n👀 No monitoring system\n\n🚫 No politics at work\n\n🎅 We hire old (and young)\n\n
\n\n#Location\nTempe, AZ